Products of the exhibitions
High-performance drill for small diameters
The new KUB DrillmaxTM high-performance solid carbide drills complete our range for drill diameters of 3 to 16 mm and length/diameter ratios of 5×D and 8×D for small diameter ranges.
more
High-Performance Drill for Deep Holes
With the new KOMET KUB® Drillmax XL, the expertise gained from developing many special solutions has been transferred to a standard tool range, which is available from stock for 20×D in diameters of 3.0 to 10.0 mm and for 30×D in diameters of 3.0 to 8.0 mm.
more
Replaceable Head Drill KUB K2
With this replaceable head system for the doublecutting KUB K2®, there are replaceable cutting heads with small drilling diameters up to 8 mm.
more
KOMET KUB Pentron®
The KOMET KUB Pentron® gives up to 20% higher cut and feed values, right through to a 5×D length/diameter ratio. It can handle extreme working conditions that were previously only feasible with 3×D.
more
KUB Centron Powerline
Maximum Drilling Performance and Dimensional Accuracy at Drilling Depths of up to 9×D. Together with the double-sided design of the cutter, this tool ensures extremely high performance in all standard materials.
more
Roughing and Finishing in One Step
Insert Technology for Roughing and Finishing in One Step. Manufactured for each application, with four to six cutting edges on a main body and for diameter ratios up to 5×D.
Precision Boring System with Bluetooth® Technology
Modern wireless networking is one of the benefits with which the new MicroKom® BluFlex™ fine adjustment head is equipped.
more
Damping elements with ABS® attachment point
With machining tools, if certain length/diameter ratios are exceeded, depending on the material and cutter being used, this may cause undesirable vibration in the tool. In these cases, such problems can be solved by using extensions with damping properties.
more
U-Axis System
Optional with Linear Encoder
The mechatronic KOMET KomTronic® U-axis systems essentially consist of a compact facing head with single slide that is driven by a servo motor and threaded spindle.
more
Facing Head with HQB technology
With our new HQB technology, we have overcome the design challenge of moving the balancing weights in front of the slide on a plane close to the overall centre of gravity for the tool and slide.
more
KOMET® Quatron hi.feed - milling cutter
The success enjoyed by our tried and tested KUB Quatron® solid drill range continues in our new milling cutter range. With the unique Quatron indexable insert developed from solid drilling technology, we are extending our experience to the new Quatron hi.feed milling cutter.
more
DIHART Reamax TS®
New coating for aluminium/cast iron machining. The ABS® attachment point makes the DIHART Reamax® TS high-performance modular reaming system even more flexible. In addition to the already available straight shank and DAH® holders, we also supply the convenience of a KOMET ABS® holder.
more
The DAH® Zero holder
offers integrated precision concentricity
The new adjustable holders provide maximum concentricity with Reamax® TS reamers from DIHART®, even when the machine or spindle conditions are less than favourable.
more
DIHART® Fullmax reamers
with coolant supply
The integration of the coolant supply makes the new Fullmax reamers the ideal solution for highperformance reaming of through holes in steel and nodular cast iron.
more
Cutting ring with insert technology
We have put our entire wealth of experience into the new generation of DIHART® Cutting Ring, called Duomax. The user gets a finish-ground tool which does not require any time-consuming setting and adjustment work to the individual cutters.
more
Reaming tool with Adjustable Inserts
An alternative to the ready-to-use ground tool variants. These reamers also feature multiple blades and offer maximum flexibility.
more
Roughing, finishing, ball nosed, torus, chamfer and
radius milling tools
The new solid carbide shank milling cutter range provides tools to meet all demands in the 3.0 - 25.0 mm diameter range.
more
Roll Form Tap MOREX R HSS-E with carbide strips
In thread machining roll form tapping becomes more popular.
The successfull roll form tap MOREX HML has been refined by KOMET to the brandnew type MOREX R. This new design allows highest tool life in all materials qualified for roll form tapping.
more
Thread Former - Solid Carbide Thread Former
In contrast to thread cutting, no chips are produced when threads are made using thread formers. The process of coldforming without machining is particularly well suited for producing threads that are highly stressed.
more
JEL JSF Synchro Tapping Chuck
Modern CNC machines allow synchronous thread tapping without a compensating chuck, also called „rigid tapping“.
more
Bore thread milling cutter for cast aluminium
Bore thread milling cutters are tools which can use thread milling to produce a tapping drill hole, 90° counterbore and thread in a single operation.
more
PCD milling cutters
Among the selling points of the new JEL PCD milling cutters are that they are highly flexible and easy to handle.
The modular system allows you to choose between brazed PCD routing cutters and PCD drilling keyway cutters. It also contains a vibration-dampened tool shank available in various lengths.
more
New Facing Head with Single Slide
PKE Type 101
The PKE single-slide facing head offers a large tool-clamping surface and therefore enables the tool to be fastened very firmly for difficult cutting edges. It is also used for small strokes, such as internal and external contours, recesses for retaining rings or sealing elements.
more
